Arduino DUE - Summary

MicrocontrollerAT91SAM3X8E
Operating Voltage 3.3V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 12 provide PWM output)
Analog Input Pins 12
Analog Outputs Pins2 (DAC)
Total DC Output Current on all I/O lines130 mA
DC Current for 3.3V Pin  800 mA
DC Current for 5V Pin  800 mA
Flash Memory512 KB all available for the user applications
SRAM96 KB (two banks: 64KB and 32KB)
Clock Speed  84 MHz

WARNING:

The current diagram of microDRUM is not compatible with the Arduino DUE. Even the code is not compatible because of the different processor.

I made the changes on a micro-microDRUM and seems to work. I will try to see if it can use the DAC to generate usable sounds, only if I can make it work I will share changes to the schema and code.

Arduino DUE - Summary

MicrocontrollerAT91SAM3X8E
Operating Voltage 3.3V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 12 provide PWM output)
Analog Input Pins 12
Analog Outputs Pins2 (DAC)
Total DC Output Current on all I/O lines130 mA
DC Current for 3.3V Pin  800 mA
DC Current for 5V Pin  800 mA
Flash Memory512 KB all available for the user applications
SRAM96 KB (two banks: 64KB and 32KB)
Clock Speed  84 MHz

ATTENZIONE:

L’attuale schema della microDRUM non è compatibile con l’Arduino DUE. Anche il codice non è compatibile a causa del diverso processore.

Ho realizzato le modifiche su una micro-microDRUM e sembra funzionare. Proverò a vedere se è possibile usare il DAC per generare dei suoni utilizzabili, solo se riuscirò rilascerò le modifiche allo schema e al codice.

Be Sociable, Share!
    Comments
    • vhdrums

      This is very interesting Massimo, it would simplify the hardware for a 12 imputs unit.

    • Chuckytu

      I’m not really sure if the cost of this arduino would justify if we only wanted to simplify the analog inputs when we can easily use a mutex for that and is way cheaper…

    • Massimo Bernava

      I agree with Chuckytu, for our project the major cost of Arduino DUE is justified only if we can produce a sampler/synthesizer using the DAC outputs.

    • LorisDido

      Utilizzeresti un memoria esterna, tipo SD, per memorizzare i suoni??

    • Massimo Bernava

      Sarà la prima prova che farò ma credo che non sarà sufficiente. Bisogna leggere i dati molto velocemente e una SD rischia di non farcela.

    • Paolo

      Ciao, Anch’io ero intenzionato a compreare la Due per realizzare un controller midi. Sai dirmi se questa scheda può trasmettere i dati midi via usb senza modifiche al firmware come la Teensy? Grazie!
      Paolo.