microDRUM

Il forum di microDRUM

IDE installation and config tool

Re: IDE installation and config tool

Postby Sno0t » 18/05/2017, 17:19

[Sorry for double post]
Sno0t
 
Posts: 22
Joined: 04/02/2015, 13:46

Re: IDE installation and config tool

Postby WesleyS » 25/05/2017, 1:16

If you press Setup>>DrumMap you'll see this pop up. You can change what pin corresponds to what pad here to match the LCD. I'll have to think about your triggering problem before I give you an answer
https://www.dropbox.com/s/y9ftuftdbywwrzs/Screenshot%20%28238%29.png?dl=0
WesleyS
 
Posts: 176
Joined: 13/01/2014, 4:42

Re: IDE installation and config tool

Postby Sno0t » 02/06/2017, 18:11

Hi Wes,
There are not enough words to thank for your help and your fast responses.
I Decided to Buy piezos and jacks as well as cables next month (and yes i mean july, currently my funds are....rather low) and start to combine everything to a 'prototype' drum to see where I could have done something wrong.
As soon as there is new development I will write back here.
I really want to geth this thing up and running to be finally able to play drums after 5 to 6 years of absence...

Kind regards,
Sno0t
Sno0t
 
Posts: 22
Joined: 04/02/2015, 13:46

Re: IDE installation and config tool

Postby WesleyS » 08/06/2017, 17:06

Good luck! I'm gonna try to get the TeensyDRUM PCB's printed soon, I know I'm ready for this project to be complete too!
WesleyS
 
Posts: 176
Joined: 13/01/2014, 4:42

Previous

Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 0 guests

cron